REACTORS

Category:

Description

BIOREACTORS

  • Description
    Borosilicate glass versatile bioreactor designed to perform anaerobic and aerobic biological reactions.
  • Composition
    Vessel with two side openings for electrodes. Cover with 10 ports. Silicone joint. 3 fixing clamps. Sparger with PTFE valve. Multipurpose tube with 3-way valve for vacuum, gas-inlet or emptying. Condenser. Septum port with 10ml syringe. Regulable speed magnetic stirring until 1500RPM. Temperature amb. +5°C to +100°C ±0.1°C. pH measurement. Stainless steel housing. Three models are produced: 500cc, 1000cc and 2000cc. APPLICATIONS Fermentation, aerobic and anaerobic sludge digestion, anaerobic digestion, biodiesel, biodegradation, photobiodegradación, photochemical polymerization.
  • Accesories
    • To implement the basic equipment there are the following accessories.
    • Addition funnel RX-01: Isobaric 250cc borosilicate glass with PTFE valve.
    • Top shaft stirrer: Adjustable speed up to 1300RPM, Ø60 PTFE turbine. RX-02 for 500cc RX-03 for1000cc, RX-04 for 2000cc.
    • Irradiation tube: 8W, 230V. RX-05 254nm (sterilizer). RX-06 366 nm (black light).
    • Addition or draining tube: Borosilicate glass with olive. Hight RX-07, short RX-08 .
    • Oximeter RX-09: Automatic scale of 0~19.99 mg/l (ppm), 0~199.9% saturation, accuracy ±1.5%
    • Resolution 0.01 mg / l (ppm)
    • Gasometer RX-10: Borosilicate glass. 2liters. With pressure gauge built.
    • Gauge RX-11: Insertable of 4Bars.
    • Kits of caps and seals: RX-12 caps. RX-13 silicone seals. RX-14 butyl seals
    • Peristaltic pump DBP-01: Adjustable flow micropump 0,03ml/min to 6,23ml/min. Interchangeable sleeves.
    • Compressor DCM-01: Flow 7L/min, 813mBar, 30dB, 230V 12W
    • Water separator: DCMX-01
    • Flow-meter REX-0540/02: Regulable 1-10 L/min
  • Technical Data
    • 230V 50Hz 500W.
    • Stainless steel housing.
    • Overall size in mm D280, H630, W300.
    • Weight 10Kg.
    • Protection class DIN EN 60529 IP33.
    • Permissible ambient temperature +4 ~+ 40°C.
    • Permissible relative humidity 80%

 

EDUCATIONAL FERMENTERS

  • Theory
    The FERMENTATION in the biotechnology is a biochemical reaction used to produce biomass by controlled growth of cells, especially bacterial, fungal and yeast. It can be aerobic oranaerobic It is performed in a bioreactor called FERMENTER where are controlled stirring, oxidation, temperature & pH
  • Description and technical data
    There are two fermenters designed to perform experiments practices of aerobic or anaerobic fermentations, such as lactics and alcoholics. They consist of a glass vessel with a stainless steel hermetic threaded cover, provided of the following ports: 1x Ø25 for a heating element, or a light tube or a sterilizer tube ; 3xØ12 for probes (pH, O2, CO2, light meter, turbidimeter, ethanol etc.) or for a condenser; 3xØ6 for a thermometer or inlet/outlet tubes for liquids or gases. Two syringes 25ml. An aeration system composed by a compressor of 120L/h 0,24Bars, flow regulation valve and a diffuser. Aheater to maintain the temperature between 35º~42°C and an exhausts glass condenser. The chassis is made of stainless steel containing the compressor and a magnetic stirrer; equipped with three switches for stirring, heating and aeration.
  • Technical data
    • Dimensions in mm: D250, W170. 230V.
    • Protection class DIN EN 60529 IP 61.
    • Permissible temperature ambient +4~+40°C.
    • Permissible relative humidity 80%. FED-01 H410mm 3Kg 40W. FED-02 H410mm, 4Kg 190W.
    • Models :
      1.  FED-01: 1000ml, with a pH meter incorporated.
      2.  FED-02: 2000ml without pH-meter.


FERMENTERS

  • Theory
    The FERMENTATION in the biotechnology is a biochemical reaction used to produce biomass by controlled growth of cells, especially bacterial, fungal and yeast. It can be aerobic oranaerobic It is performed in a bioreactor called FERMENTER where are controlled stirring, oxidation, temperature & pH
  • Composition
    • VESSEL (reactor): Jacketed borosilicate glass manufactured with three volumes 500ml, 1000ml, 2000ml.
    • COVER: Stainless steel made, provided of ten threaded ports (1 Septum), plus three inlet tubes.
    • JOINT:Silicone made. FIXING: By three clamps “sergeants”. SYRINGE 10ml
    • STIRRING: By overhead stirrer 1300rpm adjustable, switchable by jack, autoclavable, stainless steel rod with 6-blade Ø60 PTFE propellers. The 2000ml models are equipped with three propellers.
    • THERMOSTATIZATION: By jacketed reactor. Probe incorporated in pH electrode. Reading in pH monitor.
    • pH CONTROL: Composed by: Autoclavable and disconnectable by jack electrode, pH meter-regulator with two setpoints and data logger, two peristaltic micropumps of adjustable flow, two disconnectable inlet tubes for pH corrective reagents, two autoclavable bottles reagent  reservoirs with air filter.
    • OXYGENATION: Composed of compressor, rotameter, manometer, and disconnectable porous glass diffuser .
    • CONDENSER: Dimroth type, glass made.
    • HOUSING: Compact, stainless steel made.
    • COMMUNICATIONS: RS 485 port.
    • FER-02: Equipped with DISSOLVED OXYGEN AUTOMATIC CONTROL; composed by an oximetercontroller with two set points and an autoclavable electrode electrically switchable.
    • FER-03: Equipped with DISSOLVED OXYGEN AUTOMATIC CONTROL; composed by an oximetercontroller with two set points and an autoclavable electrode electrically switchable. Three peristaltic pumps, one to add anti-foaming agent, other for an auxiliary reagent and the another one for sampling. A foam cutting disc. Four devices anti-vortex (baffles)
  • Technical data
    • 230V 50Hz 500W.
    • Stainless steel housing.
    • Overall size in mm D280, H6300, W300.
    • Weight 10Kg.
    • Protection class DIN EN 60529 IP33.
    • Permissible ambient temperature +4 ~+ 40°C.
    • Permissible relative humidity 80%.
  • Accessories
    Thermostatic circulator bath TBC-22

Related products